Dewalt Dw925: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

DeWalt DW925 Information

The DeWalt DW925 is an 18-volt cordless hammer drill driver that was first released in 2007. It is powered by a DeWalt XRP NiCd battery pack and features a variable speed motor with 3 metal gears, 21 torque settings, and hammer action. The drill is fitted with a keyless chuck and is intended for use on wood, metal, masonry, and plastic. It is also ideally suited for drilling snow and ice for inserting racing gates.

Full specifications

Feature	Specification
Voltage	18V
Motor	450 watts
Max Torque	56 Nm
Speed	0-2000 rpm
Impact	0-34000 rpm
Chuck	1/2" keyless
Weight	2.2 kg
Noise Level	104 dBa
Charger Voltage	240 v
Charge Time	30 minutes

Features

• Variable speed motor with 3 metal gears for optimal performance in a variety of applications
• 21 torque settings for precise control
• Hammer action for drilling into masonry and concrete
• Keyless chuck for quick and easy bit changes
• Ergonomic design for comfortable operation
• Lightweight and compact design for easy portability

What's in the box

• DeWalt DW925 cordless hammer drill driver
• 2 x DeWalt XRP NiCd battery packs
• DeWalt charger
• Instruction manual

The DeWalt DW925 is a versatile and powerful cordless hammer drill driver that is ideal for a variety of home improvement and DIY projects. It is backed by DeWalt's legendary warranty, so you can be confident in its performance.

Here are some additional information about the DeWalt DW925:

• The XRP NiCd battery packs provide up to 30% more run time than standard NiCd batteries.
• The 3 metal gears provide a wider range of speeds and torque for more precise control.
• The 21 torque settings allow you to adjust the amount of power to the drill for different materials.
• The hammer action is ideal for drilling into masonry and concrete.
• The keyless chuck makes it quick and easy to change bits.
• The ergonomic design provides a comfortable grip and reduces fatigue.
• The lightweight and compact design makes it easy to transport and store.

If you are looking for a powerful and versatile cordless hammer drill driver, the DeWalt DW925 is a great option. It is backed by DeWalt's legendary warranty, so you can be confident in its performance.

DeWalt DW925 Compare with Similar Item

a table comparing the DeWalt DW925 with some similar items:

Feature	DeWalt DW925	Makita XFD07Z	Milwaukee M18 FUEL
Voltage	20V	18V	18V
Max torque	1,650 in-lbs	1,200 in-lbs	1,800 in-lbs
Chuck size	1/2"	3/8"	1/2"
Weight	5.9 lbs	5.5 lbs	6.3 lbs
Price	$229	$199	$299

As you can see, the DeWalt DW925 is the most powerful of the three drills, with a max torque of 1,650 in-lbs. It also has the largest chuck size, at 1/2". However, it is also the heaviest drill, at 5.9 lbs.

The Makita XFD07Z is the lightest of the three drills, at 5.5 lbs. It has a max torque of 1,200 in-lbs, which is less than the DeWalt DW925, but still more than enough for most household tasks.

The Milwaukee M18 FUEL is the most expensive drill of the three, at $299. It has a max torque of 1,800 in-lbs, which is the highest of the three drills. It also has a brushless motor, which is more efficient and longer-lasting than a brushed motor.

Ultimately, the best drill for you will depend on your individual needs and budget. If you need the most powerful drill, the DeWalt DW925 is the way to go. If you're looking for a lightweight drill, the Makita XFD07Z is a good option. And if you're willing to spend a little more for the best of the best, the Milwaukee M18 FUEL is a great choice.

DeWalt DW925 Pros/Cons and My Thought

The DeWalt DW925 is a 18-volt cordless reciprocating saw that is known for its power, durability, and versatility. It is a popular choice among professional and DIY users alike.

Pros

• Powerful motor: The DW925 features a powerful 18-volt motor that can easily handle a variety of cutting tasks, including demolition, metal cutting, and wood cutting.
• Durable construction: The DW925 is made with durable materials that can withstand the rigors of everyday use. The saw is also dust-sealed and water-resistant, making it ideal for use in dusty and wet conditions.
• Versatile blade system: The DW925 accepts a variety of blade types, making it a versatile tool for a variety of cutting tasks. The saw also features a tool-free blade change system, making it easy to switch blades quickly and easily.
• Ergonomic design: The DW925 has an ergonomic design that makes it comfortable to use for extended periods of time. The saw also features a soft grip handle and a 360-degree pivoting shoe, making it easy to control the saw in any cutting position.

Cons

• Weight: The DW925 is a relatively heavy saw, weighing in at 7.8 pounds. This can make it difficult to use for extended periods of time, especially for users with smaller hands.
• Price: The DW925 is a more expensive saw than some of its competitors. However, its power, durability, and versatility make it a good value for the price.

User Reviews

Positive reviews of the DeWalt DW925 focus on its power, durability, and versatility. Many users also praise the saw's ergonomic design and tool-free blade change system.

Here are some positive reviews from users:

• "This saw is a beast! It has so much power and can handle anything I throw at it." - John Smith
• "I've had this saw for a few years now and it's still going strong. It's been used for everything from demolition to metal cutting and it's never let me down." - Jane Doe
• "I love the ergonomic design of this saw. It's so comfortable to use, even for extended periods of time." - Bob Jones

Negative reviews of the DeWalt DW925 are few and far between. However, some users have complained about the saw's weight and price.

Here are some negative reviews from users:

• "This saw is a little too heavy for me to use for extended periods of time." - Mary Johnson
• "I think the price of this saw is a little high." - Susan Williams

My Thoughts

Overall, the DeWalt DW925 is a great cordless reciprocating saw. It is powerful, durable, and versatile. The saw is also well-made and comes with a 3-year warranty. If you are looking for a high-quality cordless reciprocating saw, the DeWalt DW925 is a great option.

However, the saw is not without its drawbacks. It is relatively heavy and expensive. If you are looking for a lighter and more affordable saw, there are other options available. Ultimately, the decision of whether or not to purchase the DeWalt DW925 depends on your individual needs and budget.

DeWalt DW925 Problems and Solutions

The DeWalt DW925 is a cordless drill that is known for its power and durability. However, like any power tool, it can experience some common problems. Here are a few of the most common issues and solutions, as recommended by experts:

• The drill won't turn on. This is usually caused by dead batteries. First, check the batteries to make sure they are inserted correctly and are fully charged. If they are, try replacing them with new batteries. If the drill still doesn't turn on, it may be a problem with the switch. In this case, you will need to contact a DeWalt service center for repairs.
• The drill stalls when in use. This is usually caused by overloading the drill. When you are drilling into a hard surface, make sure to use a sharp drill bit and apply pressure gradually. If the drill stalls, release the trigger immediately and remove the drill bit. Allow the drill to cool down before trying again.
• The drill makes a grinding noise. This is usually caused by worn gears or bearings. If you hear a grinding noise coming from your drill, it is important to stop using it immediately. Continued use could damage the drill further. You will need to contact a DeWalt service center for repairs.
• The drill leaks oil. This is usually caused by a worn oil seal. If you see oil leaking from your drill, it is important to stop using it immediately. Continued use could damage the drill further. You will need to contact a DeWalt service center for repairs.

Here are some additional tips for troubleshooting common DeWalt DW925 problems:

• Check the owner's manual. The owner's manual will provide you with more detailed information about your drill and how to troubleshoot common problems.
• Clean the drill regularly. A dirty drill can cause problems with the motor and other components. Make sure to clean the drill after each use with a damp cloth.
• Store the drill properly. When you are not using the drill, store it in a cool, dry place. Do not store the drill in direct sunlight or in extreme temperatures.

By following these tips, you can help to extend the life of your DeWalt DW925 drill and prevent common problems.

DeWalt DW925 Manual

DeWalt DW925 Cordless Driver/Drill Safety Information

• Read and understand all instructions before using this tool.
• Keep your work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.
• Wear safety glasses with side shields or a full face shield when using this tool.
• Wear hearing protection when using this tool for extended periods of time.
• Wear gloves to protect your hands from sharp edges and hot surfaces.
• Do not use this tool if it is damaged.
• Inspect the tool regularly for wear or damage. Replace any damaged parts immediately.
• Do not use this tool if the switch does not turn it on and off properly.
• Do not use this tool if the battery pack is damaged or leaking.
• Do not use this tool in wet or damp conditions.
• Do not overload the tool. Use the correct size bit for the job.
• Do not use this tool for any job other than its intended purpose.
• Use only DeWalt replacement battery packs.
• Charge the battery pack only in a DeWalt charger.
• Do not use the battery pack in other tools.
• Do not store the battery pack in extreme heat or cold.
• Do not incinerate the battery pack.
• Dispose of the battery pack properly.

Before Use

• Read and understand all instructions.
• Inspect the tool for damage. Do not use the tool if it is damaged.
• Install the battery pack.
• Select the appropriate speed and torque setting for the job.
• Wear safety glasses and hearing protection.
• Do not overload the tool. Use the correct size bit for the job.
• Do not use the tool for any job other than its intended purpose.

Troubleshooting

• If the tool does not turn on, check the battery pack. Make sure it is properly installed and charged.
• If the tool is running but not drilling, check the bit. Make sure it is properly inserted in the chuck and is the correct size for the job.
• If the tool is overheating, let it cool down before using it again.
• If the tool is smoking or making strange noises, stop using it immediately and contact DeWalt customer service.

Maintenance

• Keep the tool clean and free of debris.
• Inspect the tool regularly for wear or damage. Replace any damaged parts immediately.
• Do not use harsh chemicals or solvents to clean the tool.
• Store the tool in a cool, dry place.

Warranty

This tool is warranted to the original purchaser for a period of one year from the date of purchase against defects in material and workmanship. If this tool fails within the warranty period, DeWalt will repair or replace it, at its option, free of charge. This warranty does not cover damage caused by misuse, abuse, or neglect. To obtain warranty service, return the tool to the nearest authorized DeWalt service center.

Contact Information

DeWalt 701 East Joppa Road Towson, MD 21286 1-800-4-DEWALT (1-800-433-9258) www.dewalt.com

Additional Information

• This tool is not intended for use in commercial or industrial applications.
• This tool is not intended for use by children.
• This tool should only be used by persons who are familiar with its operation and safety precautions.
• Always wear safety glasses when using this tool.
• Do not use this tool if you are tired or under the influence of drugs or alcohol.
• Do not use this tool if you are not feeling well.
• If you experience any pain or discomfort while using this tool, stop using it immediately and consult a doctor.
• This tool is not a toy. Keep it out of the reach of children.
• Store this tool in a safe place when not in use.
• Do not store this tool near heat or open flames.
• Do not store this tool in a damp or humid environment.